输送机滚筒

Interroll Products

固定驱动输送机辊筒 3500 系列

Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires.

The use of polyamide drive heads results in very quiet running.

The tube ends are rounded, thereby allowing materials to be easily moved on from the side. Axial forces are removed through ball bearings and seals.

An axial fixation of the bearing assembly (bearing housing, ball bearing, seal) on the non-drive side can be accomplished in several ways. For the design with steel tube, the bearing assembly is pressed into the tube and then flanged. For the design with PVC tube, it is fitted with a groove inside the tube in which the press-in edge of the bearing housing engages. For the designs with PolyVee and round belt, the drive bearing assembly is also pressed into the tube and then flanged.

With a permanently installed bearing housing for a tube diameter of 50 and 60 mm, insertable polyamide drive heads, such as sprocket, toothed belt and flat belt heads, are interchangeable and can also be exchanged with friction heads. Numerous drive versions are available with flat, PolyVee, round or toothed belts as well as chains.

了解更多

Fixed Drive Curve Roller Series 3500KXO light

Driven unit handling conveying, such as transport of small cardboards or containers. Suitable for implementing driven roller curves in the packaging industry and for assembly machines as well as for implementing machine chains.

Since the tapered elements are mode of polypropylene, the net weight is low.

Using elements with a conicity of 1.8° allows implementing curve radii of only 357 mm.

The tapered elements are abrasion-proof, noise-reducing, impact-resistant and excel through a high weather-resistance.

The rollers are delivered with four taper disks and two ball sockets so that an angle compensation can be created during fastening.

了解更多

Fixed Drive Curve Roller Series 3500KXO

Driven unit handling conveying in the curve section, such as transport of cardboards, containers or tires.

The use of polyamide drive heads results in very quiet running.

Using elements with a conicity of 2.2° allows implementing tight curve radii.

The tapered elements made of polypropylene distinguish themselves with a low net weight so that good startup properties can be achieved.

The tapered elements are abrasion-proof, noise-reducing, impact-resistant and excel through a high weather-resistance.

Depending on the requirement, the curve rollers can be supplied with drive heads for PolyVee belts, round belts or chains.

了解更多

摩擦驱动输送机辊筒 3800 系列

Transporting and accumulating unit handling, such as cardboards or containers. Also suitable for implementing buffer or cooling sections.

The friction heads are interchangeable and can also be exchanged with fixed friction heads. A permanently pressed bearing housing allows inserting a variety of drive heads. The friction heads made of polyamide are secured against dropping out.

The use of polyamide or polyoxymethylene drive heads results in very quiet running.

Numerous drive types are available. Depending on the requirement profile, the rollers can be driven with flat, PolyVee or toothed belts as well as chains with a pitch of 1/2" or 3/8".

Conveyance as well as accumulation pressure depend on the weight of the materials.

Note: Please read the additional important information about the use of the friction roller in the planning section, .

了解更多

无动力输送机滚筒1100系列

Internal conveyor systems, particularly suited for cost-efficient implementation of gravity or push conveyors. Can also be used in the food processing sector. The grease used in the bearings is FDA-compliant.

The rollers consist of stainless material. Upon request, it is also possible to use stainless steel balls.

The smooth surfaces protect against dirt accumulation.

The tube ends are rounded, thereby allowing materials to be easily moved on from the side.

For axial fixation of the bearing housing, the bearing assemblies for PVC tubes starting at a diameter of 30 mm are secured with an internal press-in edge in addition to the press fit.

了解更多

Slide Bearing Conveyor Roller Series 1500/1520

Non-driven container conveyor systems where the roller is generally used for conveying packaged or unpackaged food products. Since high levels of cleanliness requirements are met, the roller can be used in moist areas and a wet cleaning can be performed.

Smooth-running, wear-resistant slide bearings, which do not allow any grease to be washed out, are installed in series 1500. In addition, the use of shaft pins made of stainless steel ensures a high corrosion resistance. Pressed-in bearing housings prevent foreign bodies from penetrating into the inside of the roller.

Contaminations can be removed with commercial cleaning agents. For particular thorough cleaning, the roller can easily be removed and reinstalled.

Slide bearing bushings allow engaging in a side profile with a maximum wall thickness of 2.5 mm and hexagon holes (does not apply to series 1520).

For axial fixation of the bearing housing, ball bearings and seal, the bearing assemblies for PVC tubes are secured with an internal press-in edge in addition to the press fit.

了解更多

Universal Conveyor Roller Series 1700 light

Internal transport of small materials as well as use for assembly machines or packaging machines. Suitable for implementing gravity roller conveyors.

The use of precision ball bearings, Technopolymer bearing housings and seals result in very quiet running.

The tube ends are rounded, thereby allowing materials to be easily moved on from the side. Axial forces are removed through ball bearings and seals.

Small roller pitches can be implemented by using rollers with a diameter of 20 or 30 mm.

To achieve a high axial load capacity, particularly of bearing housings, ball bearings and seal, the bearing housing is not only pressed into the tube for the versions with metal tube, but also flanged. The bearing assemblies of the PVC tubes with a diameter of 30 mm are secured not only with a press fit, but also with an internal press-in edge.

了解更多

1700 系列泛用输送机滚筒

Driven and non-driven conveying systems, such as transport of cardboards, containers, barrels, or wheels. Suitable for implementing gravity or push conveyors. Also usable as belt bearing roller (no deflection).

This roller series has been proven millions of times. The roller offers a very high degree of functional dependability.

The use of precision ball bearings, Technopolymer bearing housings and seals result in very quiet running.

The roller excels with a good protection against coarse dirt and dripping water. An integrated groove ensures that water can be rejected.

The tube ends are rounded, thereby allowing materials to be easily moved on from the side. Axial forces are removed through ball bearings and seals.

If an oiled precision ball bearing is used, the roller will start particularly easily.

To achieve a high axial load capacity, particularly of bearing housings, ball bearings and seal, the bearing housing is not only pressed into the tube for the versions with metal tube, but also flanged. The bearing assemblies of the PVC tubes are secured not only with a press fit, but also with an internal press-in edge.

了解更多

锥形通用输送机辊筒 1700KXO 系列

Driven unit handling conveying, such as transport of cardboards, containers or tires. Suitable for implementing gravity or driven roller curves. Tight curve radii are possible if tapered elements with a conicity of 2.2° are used.

This roller series has been proven millions of times. The roller offers a very high degree of functional dependability.

The use of precision ball bearings, Technopolymer bearing housings and seals result in very quiet running.

The roller excels with a good protection against coarse dirt and dripping water. An integrated groove ensures that water can be rejected.

The tapered elements made of polypropylene distinguish themselves with a low net weight so that good startup properties can be achieved.

The tapered elements are abrasion-proof, noise-reducing, impact-resistant and excel through a high weather-resistance.

了解更多

输送机滚筒配件

Interroll Products

Polymer Conveyor Wheel Series 2130

This series is universally applicable, e.g. it can be used as side guide roller.

The material selected is a particularly impact-resistant polymer. The wheel features a double ball race made of steel, which ensures particularly quiet running. The wheel is especially light and offers a very soft startup.

了解更多

Steel Conveyor Wheel Series 2200

This series is universally applicable, can be used in freezer areas and as side guide wheel.

The steel conveyor wheel excels with its high load capacity, robustness at high and low temperatures as well as good running stability. Hardened ball running surfaces ensure a long service life.

了解更多

Polymer Conveyor Wheel Series 2370

The product is universally applicable and particularly suited for conveyor sections in which no continuous roller can be used. Among other things, it is used with packaging machines and in mechanical engineering, e.g. for transporting workpiece carriers or containers that allow a lateral guide.

The conveyor wheel is fixed via a floating fastening at the profile and can be installed with ease. A 2-mm large slot for placing the screwdriver is available.

The wheel ensures low-noise running.

The wheel is made of impact-resistant polymer and features a double ball race.

了解更多

Omniwheel Series 2500

Crossings and switches can easily be implemented with the direction-independent turnability. Driven and non-driven conveyor segments, e.g. packing tables, assembly tables and feeds to processing machines. Particularly suited for softer materials such as cardboards.

Easy installation on round and hexagon shaft. With low mass and easy running gray wheels, the omniwheel can easily be moved in all directions. Several omniwheels can be coupled with one another. Corrosion-proof due to the use of stainless steel pins. Drive in one direction when used with a hexagon shaft.

了解更多

Pressure Roller Series 2600

Suitable for use with conveyors that are driven via flat belts or drive shaft. As belt pressure wheel suitable for flat belts with 20 to 30 mm width. When used on a drive shaft, the round belt guide wheel takes on the function of a friction shaft. A floating fastening on the profile is used.

The support of both ball bearings is accomplished with a space tube and allows a firm screw connection.

Precision ball bearings of type 6000 2Z and type 688 2Z are used.

For use under moist ambient conditions, a version made of stainless steel is available as an alternative. The slide bearings for the round belt guide wheels consist of polyamide.

The running surfaces for the belts feature a spherical shape. It allows the belt to self-center in the guides.

了解更多

Omnimat Module Series 2800

Crossings and switches can easily be implemented with the direction-independent turnability. Use as non-driven wheel conveyors for packing tables, assembly tables and feed to processing machines. Particularly suited for softer materials such as cardboards.

了解更多

Wheel Track Floway Series

The track is universally applicable and suitable for light materials. It can be used in gravity conveyors, pushing and also as side guide. They are generally used in order picking racks.

The track is designed so that it prevents an opening and jumping out of the wheels under load.

The continuous steel shaft guarantees high stability. The secure shaft support at the outer wings of the rail ensures that free-running of the wheels is also ensured under load.

了解更多

Wheel Track Series BU40

The track is universally applicable and suitable for light and medium-heavy materials. It can be used in gravity conveyors, pushing and also as side guide. Different wheel pitches can be selected.

If medium-heavy goods have to be handled, the wheel track can be equipped with steel wheels.

To transport goods with critical surfaces, polymer wheels with covered rubber gasket can be used which minimize the risk of damages.

The wheel track is made of zinc-plated steel.

The wheels can easily be inserted in the track with a snap-in function.

了解更多

Wheel Track Series BU50

The track is universally applicable and suitable for heavy materials. It can be used in gravity conveyors, pushing and also as side guide. Different roller pitches can be selected.

The track can be designed with steel rollers if heavy materials have to be moved.

To transport goods with critical surfaces, polymer rollers can be used which minimize the risk of damages. Polymer rollers are also available in a flange design.

Robust rollers of series 1700 with a diameter of 50 mm are used in the track. The rollers are riveted in the profile.

The roller track is made of zinc-plated steel.

了解更多