Interroll Products

PolyVee 带

  • Elastic standard belt, 1 to 3 % pretension, for fixed shaft distances
  • Significantly longer service life than round belts
  • Up to 300 % higher...
了解更多

PolyVee Tensioning Device

The PolyVee tensioning device enables easy tensioning of 2-rib and 3-rib PolyVee belts and is intended for roller pitches 75 mm and 100 mm....

了解更多

PolyVee Finger Guard

The PolyVee finger guard safely protects against inadvertently reaching between PolyVee belt and roller drive head.

了解更多

Fastening Socket

The fastening socket is used for tightening according to the torque of the RollerDrive fastening nut using a torque wrench. The socket...

了解更多

Counter Wrench

The RollerDrive EC310 has a glued-on ribbed nut that is located at the bearing housing. An additional nut is used to screw the RollerDrive...

了解更多

RollerDrive EC310 Extension Cable

The connecting cable of the EC310 can be extended easily with a plug connection by using the RollerDrive extension cable.

了解更多

Voltage Supply Flat Cable

The flat cable is used for the voltage supply of ConveyorControl and MultiControl. The outer contour of the line corresponds to the standard...

了解更多

ConveyorControl Communication Cable

The flat cable is used for the communication of the ConveyorControl control system. The different controls of the system simply contact the...

了解更多

MultiControl Communication Cable

The prefabricated PROFINET cable is used for communication with MultiControl. The cable allows connecting one MultiControl with another...

了解更多

MultiControl Y-cable

The Y-cable with M8 plugs enables the use of an additional input or output at the MultiControl.

了解更多

MultiControl Dummy Plug

The MultiControl features 4 RollerDrive, 2 communication and 4 sensor or I/O connections. If all connections are occupied, then the...

了解更多

Cable Bridge for Flat Cable

The cable bridge allows electrically combining two flat cables and changing the position of one flat cable. The ends of both flat cables...

了解更多

ConveyorControl Termination Box

The small termination box serves as terminating resistor for the communication cable of the ConveyorControl system. The termination box can...

了解更多

AdControl

The AdControl can be used if a RollerDrive EC300 (predecessor of EC310) is to be replaced with a RollerDrive EC310. The AdControl has a...

了解更多

Magnetic Key

The magnetic key with a high-quality neodyme magnet offers many functions. For the MultiControl, it enables switching the bus protocol or...

了解更多